Mack Anthem Models Take Command at TMC

February 18, 2020

POST AUTHOR:
COMMENTS:

GREENSBORO, NC (Feb. 18, 2020) – Two of Mack Trucks’ flagship Mack Anthem® models will take command at the Technology & Maintenance Council (TMC) 20 annual meeting, demonstrating how Mack’s technology-driven advances in fuel efficiency, driver productivity and safety are lowering customers’ total cost of ownership. TMC 20 takes place Feb. 24-27 at the Georgia World Congress Center in Atlanta.

Both Mack Anthem models on display in booth 1903 feature Mack® MP® engines, including one spec’d with the Mack MP8HE with Mack Energy Recovery Technology, which captures otherwise wasted heat from the exhaust, converts it into mechanical energy and feeds it back into the crankshaft. This extra torque allows the MP8HE to operate at lower RPMs to save fuel without sacrificing performance.

Each Mack Anthem is also equipped with Mack GuardDog® Connect, Mack’s proactive telematics solution that helps maximize uptime for customers by automatically monitoring a truck’s performance. If a potential issue is detected, GuardDog Connect alerts Mack OneCall® agents based at the 24/7 Mack Uptime Center, who quickly diagnose the issue. Should a repair be needed, the OneCall agent provides directions to the nearest dealer with available parts and service bay space, as well as repair instructions, all while the truck is still on the road.

Mack GuardDog Connect also serves as the enabling technology for Mack Over The Air, which allows customers to update truck software and parameters remotely when it’s convenient for their schedule.

Mack Anthem

Mack Anthem 70-inch Standup Sleeper 6x4

  • Engine: Mack MP8-505C, 505 horsepower and 1,860 lb.-ft. torque
  • Transmission: Mack mDRIVE™ 12-speed automated manual transmission (AMT)
  • Additional features: Mack GuardDog Connect integrated telematics; Mack ClearTech™ One exhaust aftertreatment system; Mack FXL 12.5 12,000-lb. front axle, Mack S40 40,000-lb. rear axles, Mack AL402 40,000-lb. air suspension; Bendix Wingman Fusion

Mack Anthem Daycab 6x2 with Liftable Pusher Axle

  • Engine: Mack MP8HE-415SE, 415 horsepower and 1,660 lb.-ft. torque
  • Transmission: Mack mDRIVE 12-speed AMT
  • Additional features: Mack GuardDog Connect integrated telematics; Mack ClearTech One exhaust aftertreatment system; Mack 6x2 with Liftable Pusher Axle, Mack FXL 12.5 12,000-lb. front axle, Mack Maxlite 20EZ 20,000-lb. air suspension; Bendix Wingman Fusion

Leave a Comment